Charge by computer

Allows you to set whether or not the battery in the camera is charged when the camera is connected to a computer.

  1. Shooting mode or playback mode
  2. flexible button 4 ()
  3. Camera settings
  4. Charge by computer
Flexible buttonDescription
Auto
(default setting)
When the camera is connected to a computer that is running (Transferring images to a computer with ViewNX-i), the battery inserted into the camera is automatically charged using power supplied by the computer.
OffThe battery inserted into the camera is not charged when the camera is connected to a computer.

Notes about charging with a computer

  • When connected to a computer, the camera turns on and starts charging. If the camera is turned off, charging stops.
  • About 2 hours and 30 minutes are required to charge a fully exhausted battery. Charging time increases when images are transferred while the battery is charging.
  • The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging.

When the charge lamp quickly flashes

Charging cannot be performed, possibly due to one of the reasons described below.

  • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
  • The USB cable is not connected correctly, or the battery is faulty. Make sure the USB cable is connected correctly or replace the battery if necessary.
  • The computer is in sleep mode and is not supplying power. Wake up the computer.
  • The battery cannot be charged because the computer cannot supply power to the camera due to the computer’s settings or its specifications.