Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

Alerts and Error Messages

This section lists the alerts and error messages that appear in the camera display.

Alerts

The following alerts appear in the camera display:

Alert Problem/solution
H

Low battery.

Ready a spare battery.

l

Lens is not correctly attached.

  • Ensure that lens is correctly attached.
  • Ensure that retractable lenses are extended.
  • This indicator is also displayed when a non-CPU lens is attached via a mount adapter, but in this case no action need be taken.
Bulb (flashes)

“Bulb” selected in mode S.

  • Change shutter speed.
  • Select mode M.
Time (flashes)

“Time” selected in mode S.

  • Change shutter speed.
  • Select mode M.
(Exposure indicators and shutter speed or aperture display flash)

Subject too bright; limits of camera exposure metering system exceeded.

  • Lower ISO sensitivity.
  • Mode P: Use third-party ND (neutral density) filter (filter can also be used if alert is still displayed after following settings are adjusted in mode S or A).
  • Mode S: Choose faster shutter speed.
  • Mode A: Choose smaller aperture (higher f‑number).

Subject too dark; limits of camera exposure metering system exceeded.

  • Increase ISO sensitivity.
  • Mode P: Use optional flash unit (flash can also be used if alert is still displayed after following settings are adjusted in mode S or A).
  • Mode S: Choose slower shutter speed.
  • Mode A: Choose wider aperture (lower f‑number).
c (flashes)

Flash has fired at full power.

Photo may be underexposed. Check distance to subject and settings such as aperture, flash range, and ISO sensitivity.

Full (flashes)

Memory insufficient to record further photos.

  • Delete pictures from memory card until there is room for additional pictures to be recorded. Copy pictures you wish to keep to computer or other device before proceeding.
  • Insert new memory card.

Camera has run out of file numbers.

  • Delete pictures from memory card until there is room for additional pictures to be recorded. Copy pictures you wish to keep to computer or other device before proceeding.
  • Insert new memory card.
Err (flashes)

Camera malfunction.

Press shutter-release button again. If error persists or appears frequently, consult Nikon-authorized service representative.

Card (flashes)

The memory card is write-protected (“locked”).

Slide the lock switch to the “write” position (0 The Write Protect Switch).

Error Messages

The following error messages may appear in the camera display:

Message Problem/solution
Shutter release disabled. Recharge battery.

Battery exhausted.

  • Replace with spare battery.
  • Charge battery.
This battery is unable to provide data to the camera and cannot be used. For safety, choose a battery designated for use in this camera.

Battery info not available.

  • Battery cannot be used. Contact Nikon-authorized service representative.
  • Battery level is extremely low; charge battery.

Battery cannot supply data to camera.

Replace third-party batteries with genuine Nikon batteries.

No memory card.

The memory card is inserted incorrectly or not at all.

Check that card is inserted correctly.

Cannot access this memory card. Insert another card.

Error accessing memory card.

  • Check that camera supports memory card.
  • Insert new memory card.
  • If error persists after card has been repeatedly ejected and reinserted, card may be damaged. Contact retailer or Nikon-authorized service representative.

Unable to create new folder.

Insert new memory card.

Memory card is locked. Slide lock to "write" position.

The memory card is write-protected (“locked”).

Slide the lock switch to the “write” position (0 The Write Protect Switch).

This card is not formatted. Format the card.

Memory card is not correctly formatted.

  • Format memory card.
  • Replace with correctly-formatted memory card.
FTZ mount adapter firmware version not supported. Upgrade FTZ firmware.

Mount adapter firmware out of date.

Update to the latest version of the mount adapter firmware. For more information, visit the Nikon website for your country or region.

Recording interrupted. Please wait.

Memory card does not support required video write speed.

Use card that supports required write speed or change option selected for [Frame size/frame rate] in video recording menu.

The camera is too hot. It cannot be used until it cools. Please wait. Camera will turn itself off.

Camera’s internal temperature is elevated.

Suspend shooting until camera has cooled.

High battery temperature.

Remove battery and wait for it to cool.

Folder contains no pictures.

Folder contains no pictures.

Insert memory card that contains pictures.

No pictures in folder selected for playback.

Use [Playback folder] item in playback menu to select folder that contains pictures.

Cannot display this file.

File has been modified using computer application or does not conform to DCF file standard.

Do not overwrite pictures using computer applications.

File is corrupt.

Do not overwrite pictures using computer applications.

Cannot select this file.

Selected picture cannot be retouched.

Retouch options are available only with pictures taken with or previously retouched on camera.

This video cannot be edited.

Selected video cannot be edited.

  • Videos created with other devices cannot be edited.
  • Videos under two seconds long cannot be edited.
This file cannot be saved to the destination memory card. See the camera manual for details.

Files 4 GB or larger can only be saved to memory cards formatted for exFAT. They will not be saved to cards in other formats such as FAT32.

Use a memory card with a capacity over 64 GB formatted in the camera or keep file size to under 4 GB.