d3: Pre-Release Capture Options
G button UA Custom Settings menu
Choose the length of the burst recorded from the end of the memory buffer when, and the maximum length of the burst recorded after, the shutter-release button is pressed all the way down in
- Pre-release Capture standby (maximum 90 s)
- Portion of buffer recorded to memory card at release ([Pre-release burst])
- Pictures taken after release ([Post-release burst])
- Complete high-speed burst
Option | Description |
---|---|
[Pre-release burst] | If an option other than [None] is selected, the camera will buffer frames while the shutter-release button is pressed halfway, but only the frames added to the buffer in the final n seconds, where n is the value selected for [Pre-release burst], will be recorded to the memory card when the shutter-release button is pressed all the way down (“Pre-Release Capture”).
|
[Post-release burst] | Choose the maximum length of time the camera will continue to take pictures after the shutter-release button is pressed all the way down: [1 s], [2 s], [3 s], or [Max.]. Shooting can continue for up to about 4 s when [Max.] is selected. |
A Y icon appears in the shooting display when an option other than [None] is selected for [Pre-release burst]. While the shutter-release button is pressed halfway, a green dot (I) will appear in the icon to show that buffering is in progress.
- If the shutter-release button is pressed halfway for more than about 90 seconds, I will change to C and Pre-Release Capture will be cancelled. No pre-release burst will be recorded if the shutter-release button is pressed the rest of the way down while C is displayed. Pre-Release Capture can be resumed by lifting your finger from the shutter-release button and then pressing it halfway again.
- The Y icon will start to flash 30 seconds before Pre-Release Capture is cancelled.