Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

Using an AC Adapter to Charge the Battery

Use an EH-8P AC adapter and a UC-E25 USB cable (featuring Type C connectors at both ends) or an EH-7P charging AC adapter to charge the batteries inserted in the MB-N14. The batteries can be charged even when the MB-N14 is removed from the camera.

AC Adapters and USB Cables

The EH-8P AC adapter, UC-E25 USB cable, and EH-7P charging AC adapter are not supplied with this product.

  1. Connect an EH-7P charging AC adapter or a UC-E25 USB cable connected to an EH-8P AC adapter to the USB Power Delivery connector of the MB-N14.

    EH‑8P: Connect one end of the UC‑E25 USB cable (featuring Type C connectors at both ends) to the EH‑8P AC adapter and the other to the USB Power Delivery connector of the MB-N14.

    EH‑7P: Connect the EH‑7P to the USB Power Delivery connector of the MB-N14.

  2. Plug the EH‑8P or EH‑7P into a household power outlet.

    EH-8P

    EH-7P

    • The batteries charge while the camera is off. They also charge when the standby timer is off.
    • The charge lamp for the battery that is currently charging will light while charging is in progress. The charge lamp turns off when charging is complete.

    • The time needed to charge two fully-exhausted batteries is about 5 hours.
    • If two batteries are inserted, the battery in Chamber B will charge first.
    • The shape of the plug varies with the country or region of purchase.
  3. When charging is complete, unplug the EH‑8P or EH‑7P and disconnect the cable from the USB Power Delivery connector of the MB-N14.

Cautions: Charging Batteries

  • The batteries will not charge if the cable is connected to the camera USB connector while the MB-N14 is attached. Connect the cable to the MB-N14’s USB Power Delivery connector.
  • The EH‑8P and EH‑7P can be used to charge EN‑EL15c and EN‑EL15b batteries only. They cannot be used to charge EN‑EL15a batteries. Use an MH‑25a battery charger instead.
  • Charging errors caused by, for example, the battery pack overheating or attempts to charge an EN‑EL15a are indicated by the charge lamp flashing rapidly for about 30 seconds before turning off.
  • When charging batteries with the MB-N14 removed from the camera, be sure to attach the contact cap to the MB-N14.