Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

Using an AC Adapter to Power the Camera

An EH‑7P charging AC adapter or a UC-E25 USB cable (featuring Type C connectors at both ends) connected to an EH-8P AC adapter can be connected to the USB Power Delivery connector of the MB-N14 to power the camera while the MB-N14 is attached to the camera.

Cautions: Power Supply

  • Power will be supplied to the camera only if a battery is inserted in one or both of Chambers A and B. The EH‑8P and EH‑7P will supply power when EN‑EL15c, EN‑EL15b, or EN‑EL15a batteries are inserted.
  • The battery will not charge while the camera is powered by an outside power source.
  1. After confirming that the camera is off, connect the AC adapter and MB-N14 in the same manner as when charging the battery (0 Using an AC adapter to Charge the Battery).

  2. Plug the EH‑8P or EH‑7P into a household power outlet.

    EH-8P

    EH-7P

    The shape of the plug varies with the country or region of purchase.

  3. Turn the camera on and select [ON] for [USB power delivery] in the setup menu.

    The supply of power to the camera starts.

  4. Turn the camera off when not supplying the power to the camera.

    Unplug the EH-8P or EH-7P from the outlet when not in use.

Using an Optional EH‑5d AC Adapter and EP‑5B Power Connector

The optional EH‑5d AC adapter and EP‑5B power connector provide a steady supply of power when the camera must be left on for extended periods. When using the EH‑5d with the MB-N14, insert the EP‑5B in Chamber A before connecting it to the EH‑5d.

  • EH‑5c and EH‑5b AC adapters can be used in place of the EH‑5d.
  • The EP‑5B can be inserted only in Chamber A.
  • After connecting the EP‑5B, open the power connector cover on the MB-N14, position the power connector cable so that it passes through the power connector slot and close the holder-chamber cover.
  • There is no need to insert a battery in Chamber B. Batteries inserted in Chamber B are not used while the camera is being powered by an EH‑5d and EP‑5B.
  • The EH‑8P and EH‑7P cannot be used to charge the battery or supply power to the camera when the EP‑5B is inserted.