Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

What You Can Do When the Camera Is Connected to a Computer or FTP Server

Wireless LAN connections can be used to upload pictures or control the camera remotely.

Uploading Pictures

Pictures can be selected for upload during playback. They can also be uploaded automatically as they are taken.

  • Before uploading pictures, connect the camera to the destination via wireless LAN (0 Computers: Connecting via Wireless LAN, FTP Servers: Connecting via Wireless LAN). After creating a profile, confirm that the profile name is listed in green in the [Connect to computer] or [Connect to FTP server] display.

  • To upload pictures to a computer, select [Picture transfer] for [Connect to computer] > [Connection type] in the network menu.

Caution: Access Point Mode

Select a host profile and enable camera Wi-Fi before connecting.

Destination Folders for Upload to a Computer

  • By default, pictures are uploaded to the following folders:

    • Windows: \Users\(user name)\Pictures\Wireless Transmitter Utility
    • macOS: /Users/(user name)/Pictures/Wireless Transmitter Utility
  • The destination folder can be selected using the Wireless Transmitter Utility. For more information, see online help for the Wireless Transmitter Utility.

Selecting Pictures for Upload

  1. Press the K button on the camera and select full-frame or thumbnail playback.

  2. Select a picture and press the i button.

    The i menu items used to select pictures for upload vary with the type of device connected.

  3. Highlight [Select for upload to computer] or [Select for upload (FTP)] and press J.

    • A white “priority upload” icon will appear on the picture. If the camera is currently connected to a network, upload will begin immediately and the icon will turn green.
    • Otherwise, upload will begin when a connection is established.
    • Repeat Steps 2–3 to upload additional pictures.

Removing Upload Marking

  • Repeat Steps 2–3 to remove upload marking from selected pictures.
  • To remove upload marking from all pictures, select [Connect to computer] or [Connect to FTP server] in the network menu and choose [Options] > [Deselect all?].

Filtering Pictures for Upload

The [Filtered playback] item in the playback i menu can be used to display only pictures that meet chosen criteria (0 Filtered Playback). The pictures can then all be selected for upload by highlighting [Select all for computer upload] or [Select all for upload (FTP)] in the i menu and pressing J.

Uploading Photos as They Are Taken

To upload new photos as they are taken, select [Connect to computer] or [Connect to FTP server] in the network menu and choose [ON] for [Options] > [Auto upload].

  • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera.
  • Videos are not uploaded automatically. They must instead be uploaded manually from the playback display.

The Upload Icon

Upload status is indicated by the upload icon.

s (white): Priority upload
The picture has been manually selected for upload. Pictures marked with this icon will be uploaded before pictures marked W (“upload”).
W (white): Upload
The picture has been selected for upload but upload has not yet begun.
X (green): Uploading
Upload in progress.
Y (blue): Uploaded
Upload complete.

The “Connect to Computer”/“Connect to FTP Server” Upload Status Display

The [Connect to computer] and [Connect to FTP server] displays show the following:

  1. Status:

    The status of the connection to the host. The profile name is displayed in green when a connection is established.

    While files are being transferred, the status display shows “Now uploading” preceded by the name of the file being sent. Errors are also displayed here.

    • The display for [Connect to FTP server] also includes error codes (0 Error Codes).
  2. Signal strength: The wireless signal strength.
  3. Band: The band used by the wireless network to which the camera is connected in infrastructure mode.
  4. Pictures/time remaining: The number of pictures remaining and the time needed to send them. The time remaining is an estimate only.

Loss of Signal

Wireless transmission may be interrupted if the signal is lost. Upload of pictures with upload marking can be resumed by turning the camera off and then on again once the signal has been re-established.

Caution: During Upload

Do not remove the memory card during upload.

Voice Memos

Voice memos will be included when the associated pictures are transmitted. They cannot, however, be uploaded separately.

Turning the Camera Off

The camera saves transfer marking when turned off and resumes upload when next turned on.

Caution: Uploading Protected Pictures via FTP

The copies on the FTP server will not be protected even if the originals are. Markings can be added using ratings (0 Rating Pictures).

Camera Control

The camera can be controlled from a computer running NX Tether software. Photos can be saved directly to the computer instead of to the memory card and can consequently be taken even when no memory card is inserted in the camera.

  • Note that the camera standby timer does not expire in camera control mode.
  • Before using NX Tether, connect the camera and computer via wireless LAN (0 Computers: Connecting via Wireless LAN). After creating a profile, confirm that the profile name is listed in green in the [Connect to computer] display.

  1. Select [Camera control] for [Connect to computer] > [Connection type] in the network menu.

  2. Launch the copy of NX Tether installed on the host computer.

  3. Control the camera using NX Tether.

    For information on taking pictures using NX Tether, see NX Tether online help.

The “Connect to Computer” Camera Control Display

The [Connect to computer] display shows the following:

  1. Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here (0 Problems and Solutions).
  2. Signal strength: The wireless signal strength.
  3. Band: The band used by the wireless network to which the camera is connected in infrastructure mode.

Loss of Signal

Loss of signal while the camera is connected to a wireless network may disrupt the connection to the computer. Select [End current connection] for [Connect to computer] > [Network settings] in the network menu before connecting to the network again. When the signal is re-established, the camera will reconnect to the computer and resume upload of any pictures that have yet to be transferred. Note that upload cannot be resumed if you turn the camera off before transfer is complete.