- D7500 Online Manual
- Menu Guide
- A Custom Settings: Fine-Tuning Camera Settings
- a9: Built-in AF-assist Illuminator
a9: Built-in AF-assist Illuminator
G button A Custom Settings menu
Choose whether the built-in AF-assist illuminator lights to assist the focus operation when lighting is poor.
- On
-
The AF-assist illuminator lights when lighting is poor (viewfinder photography only). AF-assist illumination is only available when both of the following conditions are met:
- AF-S is selected for autofocus mode or single-servo autofocus is selected when the camera is in AF-A mode.
- Auto-area AF is chosen for AF-area mode, or an option other than auto-area AF is chosen and the center focus point is selected.
- Off
- The AF-assist illuminator does not light to assist the focus operation. The camera may not be able to focus using autofocus when lighting is poor.
The AF-Assist Illuminator
The AF-assist illuminator has a range of about 0.5–3.0 m (1 ft 8 in.–9 ft 10 in.); when using the illuminator, remove the lens hood.
A Custom Settings: Fine-Tuning Camera Settings
a: Autofocus
a1: AF-C priority selection
a2: AF-S priority selection
a3: Focus tracking with lock-on
a4: Number of focus points
a5: Store points by orientation
a6: AF activation
a7: Focus point wrap-around
a8: Focus point options
a9: Built-in AF-assist illuminator
a10: Manual focus ring in AF mode
b: Metering/exposure
b1: ISO sensitivity step value
b2: EV steps for exposure cntrl
b3: Easy exposure compensation
b4: Matrix metering
b5: Center-weighted area
b6: Fine-tune optimal exposure
c: Timers/AE lock
c1: Shutter-release button AE-L
c2: Standby timer
c3: Self-timer
c4: Monitor off delay
c5: Remote on duration (ML-L3)
d: Shooting/display
d1: CL mode shooting speed
d2: Max. continuous release
d3: Exposure delay mode
d4: Electronic front-curtain shutter
d5: File number sequence
d6: Viewfinder grid display
d7: ISO display
d8: LCD illumination
d9: Optical VR
e: Bracketing/flash
e1: Flash sync speed
e2: Flash shutter speed
e3: Exposure comp. for flash
e4: Auto M ISO sensitivity control
e5: Bracketing order
f: Controls
f1: Custom control assignment
f2: OK button
f3: Customize command dials
f4: Release button to use dial
f5: Reverse indicators
g: Movie