- D7500 Online Manual
- Menu Guide
- B The Setup Menu: Camera Setup
- Location Data
Location Data
G button B setup menu
Adjust location data settings for use when the camera is connected to a GPS or smart device.
- Download from smart device
- Select Yes to download location data from the smart device and embed them in pictures taken over the next two hours. If the camera is connected to both a smart device and a GPS unit, location data will be downloaded from the GPS unit. Location data can not be acquired if the camera is off or the standby timer has expired.
- Position
- View the location data supplied by the GPS or smart device (the items displayed vary with the device).
- External GPS device options
-
Adjust settings for connection to optional GPS devices.
- Standby timer: Choose whether the standby timer remains active while a GPS device is connected. If Enable is selected, the exposure meters will turn off automatically if no operations are performed for the period specified in Custom Setting c2 (Standby timer, 0 c2: Standby Timer), reducing the drain on the battery. If a GP-1 or GP-1A unit is connected, the unit will remain active for a set period after the timer expires; to allow the camera time to acquire location data, the delay is extended by up to one minute after exposure meters are activated or the camera is turned on. Select Disable to disable the standby timer when a GPS device is connected.
- Set clock from satellite: Select Yes to synchronize the camera clock with the time reported by the GPS device.
B The Setup Menu: Camera Setup
Format memory card
Save user settings
Reset user settings
Language
Time zone and date
Monitor brightness
Monitor color balance
Virtual horizon
Information display
Auto info display
Info display auto off
AF fine-tune
Clean image sensor
Lock mirror up for cleaning
Image Dust Off ref photo
Image comment
Copyright information
Beep options
Touch controls
Flash warning
HDMI
Location data
Wireless remote (WR) options
Assign remote (WR) Fn button
Airplane mode
Connect to smart device
Send to smart device (auto)
Wi-Fi
Bluetooth
Eye-Fi upload
Conformity marking
Battery info
Slot empty release lock
Save/load settings
Reset all settings
Firmware version