Menu Items and Defaults
To view Custom Settings, select the A tab in the camera menus.
Custom Settings are used to customize camera settings to suit individual preferences. The Custom Settings menu is divided into two levels.
The options in the Custom Settings menu are listed below, together with their default settings. 1
- [Reset custom settings]: -
a [Focus]
- a1: [AF-C priority selection]: Release
- a2: [AF-S priority selection]: Focus
a3: [Focus tracking with lock-on]
- [Blocked shot AF response]: 3
- a4: [Focus points used]: All points
- a5: [Store points by orientation]: Off
- a6: [AF activation]: Shutter/AF‑ON
- a7: [Focus point persistence]: Auto
a8: [Limit AF-area mode selection]
- [Pinpoint AF]: M
- [Single-point AF]: L (cannot be deselected)
- [Dynamic-area AF (S)]: M
- [Dynamic-area AF (M)]: M
- [Dynamic-area AF (L)]: M
- [Wide-area AF (S)]: M
- [Wide-area AF (L)]: M
- [Wide-area AF (C1)]: M
- [Wide-area AF (C2)]: M
- [3D-tracking]: M
- [Auto-area AF]: M
- a9: [Focus point wrap-around]: OFF
a10: [Focus point display]
- [Manual focus mode]: ON
- [Dynamic-area AF assist]: ON
- [AF-C in-focus display]: OFF
- [3D-tracking focus point color]: White
- a11: [Built-in AF-assist illuminator]: ON
a12: [Focus peaking]
- [Focus peaking display]: OFF
- [Focus peaking sensitivity]: 2 (standard)
- [Focus peaking highlight color]: Red
- a13: [Focus point selection speed]: Normal
- a14: [Manual focus ring in AF mode] 2: ON
b [Metering/exposure]
- b1: [ISO sensitivity step value]: 1/3 step
- b2: [EV steps for exposure cntrl]: 1/3 EV (comp. 1/3 EV)
- b3: [Easy exposure compensation]: Off
- b4: [Matrix metering face detection]: ON
- b5: [Center-weighted area]: Standard
b6: [Fine-tune optimal exposure]
- [Matrix metering]: 0
- [Center-weighted metering]: 0
- [Spot metering]: 0
- [Highlight-weighted metering]: 0
- b7: [Keep exp. when f/ changes]: Exposure maintenance off
c [Timers/AE lock]
- c1: [Shutter-release button AE-L]: Off
c2: [Self-timer]
- [Self-timer delay]: 10 s
- [Number of shots]: 1
- [Interval between shots]: 0.5 s
c3: [Power off delay]
- [Playback]: 10 s
- [Menus]: 1 min
- [Picture review]: 4 s
- [Standby timer]: 30 s
d [Shooting/display]
- d1: [CL mode shooting speed]: 5 fps
- d2: [Maximum shots per burst]: 200
d3: [Pre-Release Capture options]
- [Pre-release burst]: None
- [Post-release burst]: Max.
- d4: [Sync. release mode options]: Sync
- d5: [Exposure delay mode]: Off
- d6: [Shutter type]: Auto
- d7: [Extended shutter speeds (M)]: OFF
d8: [Limit selectable image area]
- [FX (36×24)]: L (cannot be deselected)
- [DX (24×16)]: M
- [1:1 (24×24)]: M
- [16:9 (36×20)]: M
- d9: [File number sequence]: On
d10: [View mode (photo Lv)]: Show effects of settings
- [Show effects of settings]: Only when flash is not used
- [Adjust for ease of viewing]: Auto
- d11: [Starlight view (photo Lv)]: OFF
d12: [Warm display colors]
- [Warm display color options]: Off
- [Warm color display brightness]: 0
- d13: [LCD illumination]: OFF
- d14: [Display on during burst]: ON
d15: [Release timing indicator]
- [Indicator type]: Type B
- [Type A auto restore delay]: 1/6 s
- d16: [Image frame]: ON
- d17: [Grid type]: 3×3
- d18: [Virtual horizon type]: Type A
d19: [Custom monitor shooting display]
- [Display 1]: L (cannot be deselected)
- [Display 2]: M
- [Display 3]: M
- [Display 4]: M
- [Display 5]: M
d20: [Custom viewfinder shooting display]
- [Display 1]: L (cannot be deselected)
- [Display 2]: M
- [Display 3]: M
- [Display 4]: M
- d21: [High fps viewfinder display]: OFF
e [Bracketing/flash]
- e1: [Flash sync speed]: 1/200 s
- e2: [Flash shutter speed]: 1/60 s
- e3: [Exposure comp. for flash]: Entire frame
- e4: [Auto c ISO sensitivity control]: Subject and background
- e5: [Modeling flash]: ON
- e6: [Auto bracketing (mode M)]: Flash/speed
- e7: [Bracketing order]: MTR > under > over
- e8: [Flash burst priority]: Prioritize precise flash control
f [Controls]
- f1: [Customize i menu]: Set Picture Control, White balance, Image quality, Image size, AF-area mode/subj. detection, Focus mode, Tone mode, Vibration reduction, Custom controls (shooting), Metering, Airplane mode, View memory card info
f2: [Custom controls (shooting)]
- [Fn1 button]: White balance
- [Fn2 button]: Focus mode/AF-area mode
- [Fn button for vertical shooting]: Exposure compensation
- [AF‑ON button]: AF‑ON
- [Release mode/protect button]: Release mode
- [DISP button]: Cycle live view info display
- [Sub-selector center]: AE/AF lock
- [OK button]: Select center focus point
- [Playback button]: Playback
- [AF-ON button for vertical shooting]: Same as AF-ON button
- [Vertical multi selector center]: AE/AF lock
- [Exposure compensation button]: Exposure compensation
- [Video record button]: Live view info display off
[Command dials]
- [Exposure setting] :P: 3--/yP*, S: 3--/yTv, A: 3Av/y--, M: 3Av/yTv
- [Focus/AF-area mode selection]: 3t/ys
- [Sub-command dial zoom role]: Exposure setting
- [ISO sensitivity button]: ISO sensitivity
- [Lens Fn2 button]: AF-ON
- [Lens Fn button]: AE/AF lock
- [Lens Fn ring (clockwise)]: Recall focus position
- [Lens Fn ring (counterclockwise)]: Recall focus position
- [Lens memory set button]: Save focus position
- [Lens control ring]: (Varies with lens)
f3: [Custom controls (playback)]
- [Fn1 button]: None
- [Fn2 button]: None
- [Fn button for vertical shooting]: None
- [DISP button]: Cycle info display
- [Release mode/protect button]: Protect
- [OK button]: Zoom on/off
- [Playback button]: Resume shooting
- [Video record button]: None
[Main command dial]
- [Frame advance]: 1 frame
- [Video playback]: 10 frames
- [Frame advance zoom position]: Keep current zoom position
[Sub-command dial]
- [Frame advance]: 1 frame
- [Video playback]: 10 s
- [Frame advance zoom position]: Keep current zoom position
- [Lens Fn button]: None
- [Lens Fn2 button]: None
f4: [Touch Fn]
- [Enable/disable touch Fn]: OFF
- [Assign touch Fn]: Move focus point
[Touch Fn area]
- [“Wide” orientation]: Top right quadrant
- [“Tall” orientation]: Same as wide orientation
f5: [Control lock]
- [Shutter speed lock]: OFF
- [Aperture lock]: OFF
- [Focus-point lock]: OFF
f6: [Reverse dial rotation]
- [Exposure compensation]: U
- [Shutter speed/aperture]: U
- f7: [Release button to use dial]: OFF
- f8: [Reverse indicators]:
- f9: [Reverse ring for focus]: OFF
- f10: [Focus ring rotation range]: Non-linear
f11: [Zoom ring control (PZ lens)]
- [Reverse zoom ring rotation]: OFF
- [Zoom ring rotation range]: Default lens rotation range (°)
f12: [Assign power zoom]
- [Use x/w buttons]: OFF
- [Power zoom speed (zoom buttons)]: +3
- [Power zoom speed (zoom switch)]: +3
- f13: [Control ring response]: High
- f14: [Switch focus/control ring roles]: OFF
f15: [Full-frame playback flicks]
- [Flick up]: None
- [Flick down]: None
- [Flick advance direction]: LeftVRight
- f16: [Prefer sub-selector center]: ON
g [Video]
- g1: [Customize i menu]: Set Picture Control, White balance, Frame size/frame rate, Audio input sensitivity, AF-area mode/subj. detection, Focus mode, Electronic VR, Vibration reduction, Custom controls, Wind noise reduction, Airplane mode, Destination
g2: [Custom Controls]
- [Fn1 button]: White balance
- [Fn2 button]: Focus mode/AF-area mode
- [Fn button for vertical shooting]: Exposure compensation
- [AF‑ON button]: AF‑ON
- [Release mode/protect button]: None
- [DISP button]: Cycle live view info display
- [Sub-selector center]: AE/AF lock
- [OK button]: Select center focus point
- [Playback button]: Playback
- [AF-ON button for vertical shooting]: Same as AF-ON button
- [Vertical multi selector center]: AE/AF lock
- [Shutter-release button]: None
- [Video record button]: Record videos
- [Exposure compensation button]: Exposure compensation
- [ISO sensitivity button]: ISO sensitivity
[Command dials]
- [Exposure setting]: A: 3Av/y--, M: 3Av/yTv
- [Focus/AF-area mode selection]: 3t/ys
- [Sub-command dial zoom role]: Exposure setting
- [Lens Fn button]: AE/AF lock
- [Lens Fn2 button]: AF-ON
- [Lens Fn ring (counterclockwise)]: Recall focus position
- [Lens Fn ring (clockwise)]: Recall focus position
- [Lens memory set button]: Save focus position
- [Lens control ring]: (Varies with lens)
g3: [Control lock]
- [Shutter speed lock]: OFF
- [Aperture lock]: OFF
- [Focus-point lock]: OFF
g4: [Limit AF-area mode selection]
- [Single-point AF]: L (cannot be deselected)
- [Wide-area AF (S)]: M
- [Wide-area AF (L)]: M
- [Wide-area AF (C1)]: M
- [Wide-area AF (C2)]: M
- [Subject-tracking AF]: M
- [Auto-area AF]: M
g5: [AF speed]: 0
- [When to apply]: Always
- g6: [AF tracking sensitivity]: 4
- g7: [Hi-Res Zoom speed]: 0
g8: [Assign power zoom]
- [Use x/w buttons]: OFF
[Power zoom speed (zoom buttons)]
- [Pre-recording (STBY)]: 0
- [Video recording (REC)]: 0
[Power zoom speed (zoom switch)]
- [Pre-recording (STBY)]: +3
- [Video recording (REC)]: +3
- g9 [Power/Hi-Res Zoom collab]: On (synch)
- g10: [Fine ISO control (mode M)]: Off
- g11: [Extended shutter speeds (S/M)]: OFF
- g12: [Shutter mode]: Shutter speed
- g13: [View assist]: OFF
g14: [Zebra pattern]
- [Pattern tone range]: Zebra pattern off
- [Pattern]: Pattern 1
- [Zebra pattern color]: Black
- [Highlight threshold]: 250
- [Mid-tone range]: Value: 160; range: ±10
- g15: [Limit zebra pattern tone range]: No restrictions
- g16: [Grid type]: 3×3
g17: [Brightness information display]: Histogram
- [Histogram]
- [Size]: Standard
- [Transparency]: 1 (low transparency)
- [Position]: Bottom right
- [Wave-form monitor]
- [Size]: Standard
- [Transparency]: 1 (low transparency)
- [Position]: Bottom right
- [Histogram]
g18: [Custom monitor shooting display]
- [Display 1]: L (cannot be deselected)
- [Display 2]: M
- [Display 3]: M
- [Display 4]: M
g19: [Custom viewfinder shooting display]
- [Display 1]: L (cannot be deselected)
- [Display 2]: M
- [Display 3]: M
- g20: [Red REC frame indicator]: ON
Items modified from default values are indicated by asterisks (“U“).
Available with compatible lenses only.