Connecting to Computers
To upload pictures to a computer, connect the camera via a wireless network or using the supplied USB cable.
Connecting via USB
Connect the camera using the supplied USB cable. You can then use NX Studio software to copy pictures to the computer for viewing and editing.
Installing NX Studio
You will need an Internet connection when installing NX Studio. Visit the Nikon website for the latest information, including system requirements.
-
Download the latest NX Studio installer from the website below and follow the on-screen instructions to complete installation.
- Note that you may be unable to download pictures from the camera using earlier versions of NX Studio.
Copying Pictures to a Computer Using NX Studio
See online help for detailed instructions.
-
Connect the camera to the computer.
After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown.
Using a Card Reader
Pictures can also be copied from a memory card inserted in a third-party card reader. You should however check that the card is compatible with the card reader.
-
Turn the camera on.
- The Nikon Transfer 2 component of NX Studio will start. Nikon Transfer 2 image transfer software is installed as part of NX Studio.
- If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
- If Nikon Transfer 2 does not start automatically, launch NX Studio and click the “Import” icon.
-
Click Start Transfer.
Pictures on the memory card will be copied to the computer.
-
Turn the camera off.
Disconnect the USB cable when transfer is complete.
Windows 10 and Windows 8.1
Windows 10 and Windows 8.1 may display an AutoPlay prompt when the camera is connected.
Click the dialog and then click Nikon Transfer 2 to select Nikon Transfer 2.
macOS
If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS) and select Nikon Transfer 2 as the application that opens when the camera is detected.
Caution: Transferring Videos
Do not attempt to transfer videos from the memory card while it is inserted in a camera of a different make or model. Doing so could result in the videos being deleted without being transferred.
Cautions: Connecting to Computers
- Do not turn the camera off or disconnect the USB cable while transfer is in progress.
- Do not use force or attempt to insert the connectors at an angle. Be sure also to keep the connectors straight when disconnecting the cable.
- Always turn the camera off before connecting or disconnecting a cable.
- To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. Connect the camera to a pre-installed USB port.
Wireless Networks (Wi-Fi)
The following methods can be used to connect to a computer via Wi-Fi. For more information, see the Network Guide.
Built-in Wi-Fi
Use the Connect to PC option in the camera setup menu to connect to computers either directly or via a wireless router.
Connection via a wireless router
Direct wireless connection
The WT-7 Wireless Transmitter
When the camera is connected to an optional WT-7 wireless transmitter, the Wireless transmitter (WT-7) option in the setup menu can be used for connection to computers or ftp servers.
Use the WT-7 for connection to Ethernet networks and for more reliable connections to wireless networks. With Camera Control Pro 2 (available separately), the camera can be controlled remotely and pictures saved directly to the computer as they are taken.