Save/Load Menu Settings

G button UB setup menu

Save current camera menu settings to a memory card. You can also load saved settings, allowing menu settings to be shared among cameras of the same model.

• If two memory cards are inserted, the settings will be saved to the card in Slot 1.

The following settings are saved:

• PHOTO SHOOTING MENU

  • [Shooting menu bank]
  • [Extended menu banks]
  • [File naming]
  • [Role played by card in Slot 2]
  • [Image area]
  • [Image quality settings]
  • [Image size settings]
  • [RAW recording]
  • [ISO sensitivity settings]
  • [White balance]
  • [Set Picture Control] (Custom Picture Controls are saved as [Auto])
  • [Color space]
  • [Active D-Lighting]
  • [Long exposure NR]
  • [High ISO NR mode]
  • [High ISO NR]
  • [Vignette control]
  • [Diffraction compensation]
  • [Auto distortion control]
  • [Skin softening]
  • [Portrait impression balance]
  • [Photo flicker reduction]
  • [High-frequency flicker reduction]
  • [Metering]
  • [Flash control]
  • [Focus mode]
  • [AF-area mode]
  • [AF subject detection options]
  • [Vibration reduction] (the options available vary with the lens)
  • [Auto bracketing]
  • [Auto capture]

• VIDEO RECORDING MENU

  • [Shooting menu bank]
  • [Extended menu banks]
  • [File naming]
  • [Destination]
  • [Video file type]
  • [Frame size/frame rate]
  • [Video quality (N-RAW)]
  • [Image area]
  • [Extended oversampling]
  • [ISO sensitivity settings]
  • [White balance]
  • [Set Picture Control] (Custom Picture Controls are saved as [Auto])
  • [HLG quality]
  • [Active D-Lighting]
  • [High ISO NR]
  • [Vignette control]
  • [Diffraction compensation]
  • [Auto distortion control]
  • [Skin softening]
  • [Portrait impression balance]
  • [Video flicker reduction]
  • [High-frequency flicker reduction]
  • [Metering]
  • [Focus mode]
  • [AF-area mode]
  • [AF subject detection options]
  • [Vibration reduction] (the options available vary with the lens)
  • [Electronic VR]
  • [Microphone sensitivity]
  • [Attenuator]
  • [Frequency response]
  • [Wind noise reduction]
  • [Mic jack plug-in power]
  • [Headphone volume]
  • [Timecode] (excepting [Timecode origin])
  • [External rec. cntrl (HDMI)]
  • [Hi-Res Zoom]
  • [Auto capture]
• CUSTOM SETTINGS MENU: All items

• PLAYBACK MENU

  • [Playback display options]
  • [Delete pictures from both slots]
  • [Dual-format recording PB slot]
  • [Filtered playback criteria]
  • [Series playback]
  • [Picture review]
  • [After delete]
  • [After burst, show]
  • [Record camera orientation]
  • [Auto-rotate pictures]

• SETUP MENU

  • [Language]
  • [Time zone and date] (excepting [Date and time])
  • [Viewfinder display size]
  • [Limit monitor mode selection]
  • [Auto rotate info display]
  • [Non-CPU lens data]
  • [Distance units]
  • [Save focus position]
  • [Save zoom position (PZ lenses)]
  • [Auto temperature cutout]
  • [Sensor shield behavior at power off]
  • [Clean image sensor]
  • [Image comment]
  • [Copyright information]
  • [IPTC]
  • [Voice memo options]
  • [Camera sounds]
  • [Silent mode]
  • [Touch controls]
  • [HDMI]
  • [USB connection priority]
  • [Location data (built-in)] (excepting [Position] and [Create log])
  • [Wireless remote (WR) options]
  • [Assign remote (WR) Fn button]
  • [USB power delivery]
  • [Energy saving (photo mode)]
  • [Slot empty release lock]

• MY MENU

  • The current contents of “My Menu”
  • [Choose tab]

• RECENT SETTINGS

  • The current contents of the recent settings menu (up to 20 items)
  • [Choose tab]

• The playback i menu

  • [Retouch] > [Customize retouch options]

Save Menu Settings

Save settings to a memory card. If the card is full, an error will be displayed and settings will not be saved. Saved settings can only be used with other cameras of the same model.

Load Menu Settings

Load saved settings from a memory card. Note that [Load menu settings] is available only when a memory card containing saved settings is inserted.